Filter
Top Products
Chapter 13 - Phone interface 13-13
Call costs (Menu 6 2)
This network service allows you to check various
call costs. The costs are shown in charging units
or units of currency that you have set within
Menu 6 4. The call cost is shown for each SIM
card separately. For these settings you need the
PIN2 code. Contact your service provider for
more information.
Last call units (Menu 6 2 1)
Shows the cost of the last, or current, call in
charging units or the currency set in Menu 6 4.
All calls units (Menu 6 2 2)
Shows the total cost of all calls in charging units
or units of currency that you have set in Menu 6 4.
Clear counters (Menu 6 2 3)
Resets all cost counters. Resetting requires the
PIN2 code. This service is not available with SIM
cards that do not support the PIN2 code.
Note: There is no way to undo the reset operation.
Call costs limit (Menu 6 3)
This function allows you to limit the total costs
of outgoing calls to a specified number of charg-
ing units or units of the currency that you have
set in Menu 6 4. For this service you need the
PIN2 code.
Emergency calls to the number 911 can be made
even if there are no charging units left.
Changing the call costs limit requires the PIN2
code. To turn the limit on, select Set. Enter the
cost limit in charging units or currency units. If
you define the limit in currency units, you can
press or to insert a decimal point.
After the limit has been turned on, the quantity
of remaining charging or currency units will be
continuously shown on the display when in the
idle mode. When all units have been used, no
calls can be made except for emergency calls to
the number 911.
To turn the limit off, select None.
Show costs in (Menu 6 4)
Within this submenu, you may select whether
the call cost limits (and the amount of remaining
calling time) will be displayed in currency or
charging units. Contact your network operator
for charging unit prices. Changing the call costs
unit requires the PIN2 code.
To show limits in currency units, select Currency,
or Units to show limits in charging units. If you
selected Currency, enter the charging unit price.
Use or to insert a decimal point. Next, en-
ter the currency name.
Network selection (Menu 7)
The communicator can be set to select automati-
cally one of the GSM 1900 networks available in
your area, or you may select the desired GSM net-
work manually in this menu. This function comes
in handy when you want to select a particular
network, e.g., due to lower call charges.
When the Automatic option is selected, the
communicator tries to utilize the network it
was last registered on. Outside of the home
network service area, the communicator will
select one of the networks which have a
roaming agreement with the home network.
In the Manual mode, when you pick up a net-
work manually from the network list, the
communicator will always attempt to regis-
ter on that network. If the communicator
cannot reach or loses contact with the se-
lected network, you are prompted to select
another network.
Memory functions (Menu 8)
Memory selection (Menu 8 1)
Choose A: SIM Card, or B: Phone (recommend-
ed).
Within this submenu, you can set the phone
interface to use either the SIM card memory
(“A memory”) or the communicator’s internal
memory (“B memory”). The letter indicating the
currently selected memory is shown in the top
left corner of the phone interface display.