Filter
Top Products
Advanced WLAN settings
Select Options > Advanced settings and from the
following:
● IPv4 settings — Enter the IP address of your
device, the subnet IP address, the default
gateway, and the IP addresses of the primary and
secondary DNS servers. Contact your internet
service provider for these addresses.
● IPv6 settings — Define the type of DNS address.
● Ad-hoc channel (only for Ad-hoc) — To enter a
channel number (1-11) manually, select User
defined.
● Proxy server address — Enter the address for
the proxy server.
● Proxy port number — Enter the proxy port
number.
Packet data settings
Press , and select Tools > Settings >
Connection > Packet data.
The packet data settings affect all access points
using a packet data connection.
● Packet data connection — If you select When
available and you are in a network that supports
packet data, the device registers to the packet
data network. Starting an active packet data
connection (for example, to send and receive e-
mail) is quicker. If there is no packet data
coverage, the device periodically tries to
establish a packet data connection. If you select
When needed, the device uses a packet data
connection only if you start an application or
action that needs it.
● Access point — The access point name is needed
to use your device as a packet data modem to a
compatible computer.
● High speed packet access — Enable or disable
the use of HSDPA (network service) in UMTS
networks.
Wireless LAN settings
Press , and select Tools > Settings >
Connection > Wireless LAN.
● Show WLAN availability — Select whether
is displayed in the standby mode when a wireless
LAN is available.
● Scan for networks — If you set Show WLAN
availability to Yes, select how often the device
searches for available wireless LANs and updates
the indicator.
To view advanced settings, select Options >
Advanced settings. Changing wireless LAN
advanced settings is not recommended.
173
Settings