Filter
Top Products
Tools 106
3.
Press the
OK
(left) soft key ( ). Your phone displays the
first digit sequence and “
Please say
” plays through the
speaker followed by the four digits appearing in the
display.
4. Wait for the beep and say the digits using your normal tone
of voice. After a moment, the phone plays back the
recording and prompts “Did the recording sound ok?”
•
If the recording was good, say “
Yes
.”
•
If you need to re-record, say “
No
.”
If you say “
No
,” the phone prompts you to pronounce the digits
again. Wait for the beep and then say the digits.
Repeat this step until you’re satisfied with the recording.
5. After confirming that the recording sounds “ok”, continue
the recording process with the next set of digits.
6. After six sets of digits, the phone asks whether you want to
do more adaptation. Answer “
Yes
.”
7. Repeat steps 4 and 5 for another six sets of digits. After
the second group of six sets of digits, “
Adaptation
complete
” plays through the speaker and you are returned
to the
Adapt Digits
menu.
Reset Digits
To reset digit dialing to factory default settings, do the following:
1. In standby mode, press the
MENU
key ( ), then press
(for
Tools
), (for
Voice Service
), (for
Voice Settings
), and for
Digit Dialing
. The following
options appear in the display:
• Adapt Digits
•Reset Digits
2. Use the navigation keys to highlight
Reset Digits
, then
press the key. The phone prompts you to confirm
digit adaptation rest.
Press the
OK
(left) soft key ( ) to reset your digit
adaptation, or press the
Back
(right) soft key ( ) to
cancel and retain your digit adaptation.
3. Press the key to save and exit.
Sound
Sound lets you specify what (if any) text prompts you want your
phone to read to you through the earpiece.