Filter
Top Products
Call Functions 24
•
“
Work
”
•
“
Mobile
”
•
“
My Circle
”
Voice Dial dials the specified number.
Dialing a Number
To dial a number using Voice Dial, do the following:
1. In standby mode, press and hold the
key.
“
Say a Command
” appears in the display and is
pronounced through the speaker.
2. Say “
Call
”.
VoiceSignal prompts you to “
Say the name or #
”.
3. Speak clearly and say the telephone number of the person
you want to call. For example, say “7 8 1 9 7 0 5 2 0 0."
If it recognizes the number, Voice Dial repeats and dials the
number. If Voice Dial is not sure it has recognized the
number, it displays a choice list of up to three numbers and
prompts you with “
Did you say?
” followed by the first
number on the list.
4. Say “
Yes
” to confirm the number or “
No
” to hear the next
one, or use the keypad to select the correct number from
the list. (For more information, refer to “Choice Lists” on
page 104.)
•
Press the
Repeat
(right) soft key ( ) to say the name again.
•
Press the
Settings
(left) soft key ( ), then press the
Exit
(right)
soft key ( ) to exit Voice Dial without dialing.
Pause Dialing From a Contacts Entry
•
If you voice dial a contact that contains (two-second) T pause(s) simply
wait for the pauses to pass and the dialing to complete.
•
If you voice dial a contact that contains (hard) P pause(s), wait for the
appropriate prompt(s) from the number you are calling (credit card
number, bank account number, and so on) and enter the appropriate
response(s).
Answering a Call
Your phone notifies you of a call in the following ways:
•
A ring tone sounds and/or your phone vibrates (Your phone provides
seven ring volume settings including:
Silence All
,
Vibrate
,
1 Beep
,
Low
,
Medium
,
Medium/High
, or
High
, and/or different ring types to
distinguish callers.)
•
A phone number (unless blocked by the caller) and a name appear in
the display (If the caller’s number and name are stored in your
Contacts list).