Filter
Top Products
Managing Your Device 135
Encrypt files on your storage card
You can set your device to encrypt files as they are saved on the storage card.
Tap
Start > Settings > System tab > Encryption.
Select
Encrypt files when placed on a storage card.
Notes • Encrypted files can only be read on the device that encrypted them.
• Encrypted files are opened just like other files, provided you are using the device that encrypted them.
There is no separate step for you to take to read these files.
Important If Encrypt files when placed on a storage card is enabled, backup all files from the storage card
before using Clear Storage, hard reset, or updating the ROM system software. Otherwise you will no
longer be able to access the encrypted files on the storage card. Use ActiveSync or Windows Mobile
Device Center to transfer files between your storage card and computer. After the procedure, copy
your files back to the storage card.
13.6 Connecting to an External Display
The TV Out function outputs the device’s screen contents and audio to an external display with an RCA cable
socket such as a television.
Notes • You need an HTC TV Out cable to connect your device to an external display. The HTC TV Out cable is sold
separately.
• When you plug in the HTC TV Out cable to your device, you will not be able to play music files from the TouchFLO
3D Music tab, if TouchFLO 3D is enabled. See Chapter 3 about enabling TouchFLO 3D.
• It is recommended that you use an audio accessory (not the HTC TV Out cable) such as the wired headset when
you want to listen to music on your device. You can check the HTC web site for other audio accessories for your
device.
Connect the device to an external display
Turn off the external display.
Connect the ends (red, white, and yellow RCA plugs) of the
HTC TV Out cable to the external display’s RCA sockets.
Connect the mini-USB end of the HTC TV Out cable to the
sync connector at the bottom of the device. The TV Out screen
opens.
Note The display automatically changes to landscape mode after
connecting the HTC TV Out cable.
Choose the video standard to use when outputting the video
and then tap Done. For example, if your video is in the NTSC
standard and you select PAL-M, TV Out will automatically
convert your video to PAL-M before it outputs to the external
display.
1.
2.
3.
4.
Tap the type of media you want to output.
Turn on the external display and then switch it to the input signal that you connected the HTC TV Out
cable to (for example, Video 1).
1.
2.
5.
6.