Filter
Top Products
13-12 Menus
1998 Nokia Mobile Phones. All Rights Reserved.
tery and switch on the phone interface, the
communicator will remain locked.
The communicator can also be locked auto-
matically if the Autolock period is turned on
in the communicator interface (see chapter
10 "System: Security" on page 10-2).
To lock the communicator, press Select to ac-
tivate the lock code prompt and enter the lock
code. The communicator locks immediately.
To unlock the communicator, press Unlock
and enter the lock code.
Note: To prevent the communicator from locking
itself again after the autolock period, de-
activate the option in the Security appli-
cation settings (see chapter 10 "System:
Security").
Duration and cost (Menu 6)
In this menu, you can view the duration and cost
of your outgoing and incoming calls, reset the
timers and counters, limit the duration of calls
and select whether the call costs are shown in
charging units or units of currency.
Note: The actual time invoiced for calls and serv-
ices from your service provider may vary,
depending upon network features, round-
ing-off for billing, taxes and so forth.
Call duration (Menu 6 1)
The communicator provides two call timers
which help you monitor the duration of your
calls.
Last call duration (Menu 6 1 1)
Shows the duration of the last, or current,
outgoing or incoming call in hours, min-
utes and seconds, e.g., 00:02:15.
Note: The duration of incoming calls is not dis-
played when you are within your home
network.
All calls duration (Menu 6 1 2)
Shows the total cost of all calls made or
received with any SIM card that you have
used with the communicator.
Clear timers (Menu 6 1 3)
Resets all timers.
Note: There is no way to undo the reset operation.
Call costs (Menu 6 2)
This network service allows you to check var-
ious call costs. The costs are shown in charg-
ing units or units of currency that you have
set in Menu 6 4. The call cost is shown for
each SIM card separately. For these settings
you need the PIN2 code. Contact your service
provider for more information.
Last call units (Menu 6 2 1)
Shows the cost of the last, or current, call
in charging units or the currency set in
Menu 6 4.
All calls units (Menu 6 2 2)
Shows the total cost of all calls in charg-
ing units or units of currency that you
have set in Menu 6 4.
Clear counters (Menu 6 2 3)
Resets all cost counters. Resetting requires
the PIN2 code. This service is not available
with SIM cards that do not support the
PIN2 code.
Note: There is no way to undo the reset operation.
Call costs limit (Menu 6 3)
This function allows you to limit the total
costs of outgoing calls to a specified number
of charging units or units of the currency that
you have set in Menu 6 4. For this service you
need the PIN2 code.
Emergency calls to the number 112 can be
made even if there are no charging units left.
Changing the call costs limit requires the PIN2
code. To turn the limit on, select Set. Key in the
cost limit in charging units or currency units. If
you define the limit in currency units, you can
press or to insert a decimal point.
After the limit has been turned on, the quan-
tity of remaining charging or currency units
will be continuously shown on the display
when in idle mode. When all units have been
used, no calls can be made except for emer-
gency calls to the number 112.
To turn the limit off, select None.