Filter
Top Products
10-4 User data
1998 Nokia Mobile Phones. All Rights Reserved.
face Security options menu (Menu 5 6 1).
The lock code is needed to lock (except when
the autolock period is in use) and unlock the
communicator. The device can be locked in
both the communicator interface (System,
Security: Lock system) and the phone inter-
face (System lock, Menu 5 8). The lock code is
also required when you change the SIM
change security setting and turn the Autolock
period on or off. You can find the lock code on
a sticker in the sales package of your commu-
nicator. Keep it secret and in a safe place,
separate from the communicator.
If you key in an incorrect lock code (you get a
code error message) several times in succes-
sion, the communicator must be sent back to
the dealer to be unlocked.
Barring password
When the phone interface is switched on, this
setting allows you to change the barring
password. The new code must be 4 digits long.
The barring password can also be changed in
the phone interface Security options menu
(Menu 5 6 4).
The barring password is needed to change call
barrings, see chapter 4 "Telephone: Telephone
settings" on page 4-6. You obtain the pass-
word from your network operator when you
subscribe to the service.
If the password is changed correctly, the com-
municator requests the network to perform the
desired operation (see chapter 4 "Telephone:
Telephone settings - Changing the settings of
network services" on page 4-6).
Other codes
PIN2 code (4 to 8 digits)
The PIN2 code can only be changed in the phone
interface Security options menu (Menu 5 3).
The PIN2 code is supplied with some SIM
cards. The PIN2 code is required to access
some functions, such as call charging unit
counters, which must be supported by the
SIM card. If you enter a wrong PIN2 code
three times in succession, the PIN2 code is
disabled and cannot be used any more.
PUK and PUK2 codes (8 digits)
You cannot change the PUK (PIN Unblocking
Key) codes. If you lose the code, contact your
network operator.
The PUK is supplied with the SIM card. The
code is required when you want to change a
disabled PIN code. If you enter a wrong PUK
code ten times in succession, the SIM card is
rejected and you cannot make or receive any
calls, except emergency calls. Contact your
network operator for a new card.
The PUK2 code is supplied with some SIM
cards. The code is required when you want to
change a disabled PIN2 code. If you enter a
wrong code ten times in succession, you will
not be able to access the functions which re-
quire the PIN2 code. To utilise these func-
tions, contact your network operator for a
new card.
User data
The User data card contains your personal infor-
mation. You can freely edit the information in
the Name, Company, Job title, Address, Tel, Fax,
Tel(GSM), Fax(GSM), Mail and URL fields.
The User data will automatically be included in
the corresponding fields of the fax cover page
within the Fax application. Likewise, the SMS ap-
plication uses this information when you send
your own business card.