• Send to caller — Send the video clip to the caller
during an active call.
• Post to — Send the video clip to an online album
(network service).
• Delete — Delete the video clip.
To enter a new name for the video clip, select
Options > Rename video clip.
Image settings
Select Menu > Media > Camera.
To change the still image settings, select Options >
Settings and from the following:
• Image quality — Set the image quality. The better
the image quality, the more memory the image
consumes.
• Show GPS info — Add location information to the
captured image.
• Add to album — Define to which album the
captured images are saved.
• Show captured image — To see the image after
the capture, select Yes. To continue capturing
images immediately, select Off.
• Default image name — Define the default name
for the captured images.
• Extended digital zoom — The On (continuous)
option allows the zoom increments to be smooth
and continuous between the digital and extended
digital zoom. The Off option allows a limited
amount of zoom while retaining the image
resolution.
• Capture tone — Set the tone that sounds when you
capture an image.
• Memory in use — Choose where to store your
images.
• Restore camera settings — Restore the camera
settings to the default values.
Video settings
Select Menu > Media > Camera.
To change the video mode settings, select Options >
Settings and from the following:
• Video quality — Set the quality of the video clip.
Select Sharing, if you want to send the video clip
using a multimedia message. The clip is recorded
with OCIF resolution, in the 3GPP file format, and the
size is limited to 300 kB (approximately 20 seconds).
You may not be able to send video clips saved in the
MPEG-4 file format in a multimedia message.
• Show GPS info — To add the location information
to the recorded video clip, if the information is
available, select On.
• Audio recording — Select Mute if you do not want
to record sound.
• Add to album — Define to which album the
recorded videos are saved.
• Show captured video — View the first frame of
the recorded video clip after the recording stops. To
view the entire video clip , select Play from the
toolbar.
• Default video name — Define the default name for
recorded video clips.
• Memory in use — Choose where to store your video
clips.
105
Media
