Filter
Top Products
• Network — Adjust the network settings.
Call settings
Select Menu > Ctrl. panel > Settings and Phone >
Call.
Select from the following:
• Send my caller ID — Display your phone number to
the person you are calling.
• Send my internet call ID — Display your internet call
address to the person you are calling using an internet
call. This setting is only available if you have defined
internet call service settings.
• Call waiting — Set the device to notify you of incoming
calls while you are in a call (network service).
• Internet call waiting — Set the device to notify you
of a new incoming internet call while you are in a call.
This setting is only available if you have defined
internet call service settings.
• Internet call alert — Select On to set your device to
alert for incoming internet calls. If you select Off, you
receive only a notification if you missed a call. This
setting is only available if you have defined internet call
service settings.
• Decline call with msg. — Reject a call, and send a text
message to the caller.
• Message text — Write the standard text message that
is sent when you reject a call.
• Own video in recvd. call — Allow or deny video
sending during a video call from your device.
• Image in video call — Display a still image if video is
not sent during a video call.
• Automatic redial — Set your device to make a
maximum of 10 attempts to connect the call after an
unsuccessful call attempt. To stop automatic redialing,
press the end key.
• Show call duration — Display the length of a call
during the call.
• Summary after call — Display the length of a call after
the call.
• 1-touch dialing — Activate 1-touch dialing.
• Anykey answer — Activate anykey answer.
• Noise cancellation — Activate earpiece active noise
cancellation.
• Contact search — Activate contact search in the home
screen.
Network settings
Select Menu > Ctrl. panel > Settings and Phone >
Network.
To select the network mode, select Network mode and
Dual mode, UMTS, or GSM. In dual mode, the device
switches automatically between networks.
Tip: Selecting UMTS enables faster data transfer,
but may increase the demand on battery power and
reduce the battery life. In regions close to both GSM
and UMTS networks, selecting Dual mode may
cause constant jumping between the two networks,
which also increases the demand on battery power.
To select the operator, select Operator selection and
Manual to select from available networks, or Automatic
to set the device to select the network automatically.
121
Settings