Filter
Top Products
Switch the device on or
off
Switch on
1. Press and hold the power key.
2. If prompted, enter a PIN code or lock code,
and select OK. The preset lock code is 12345.
If you forget the code and your device is
locked, your device will require service and
additional charges may apply. For more
information, contact a Nokia Care point or your device
dealer.
Switch off — Press the power key briefly, and select
Switch off!.
Charge the battery
Your battery has been partially charged at the factory. If
the device indicates a low charge, do the following:
1. Connect the charger to a wall outlet.
2. Connect the charger to the device.
If you are using a USB charger, connect the charger plug
to the USB connector.
3. When the battery is fully charged, disconnect the
charger from the device, then from the wall outlet.
You do not need to charge the battery for a specific length
of time, and you can use the device while it is charging. If
the battery is completely discharged, it may take several
minutes before the charging indicator appears on the
display or before any calls can be made.
Charging with the USB data cable
Charging with the USB data cable is slower than charging
with the charger. Charging with the USB data cable may
not work if you use a USB hub. USB hubs may be
incompatible for charging a USB device.
When the USB data cable is connected, you can transfer
data at the same time as charging.
1. Connect a compatible USB device to your device using
a compatible USB data cable.
Depending on the type of the device that is used for
charging, it may take a while for charging to start.
2. If the device is switched on, select from the available
USB modes.
17
Get started