• Date format and Date separator — Define the date
format and separator.
• Time format and Time separator — Select whether
to use the 12-hour or 24-hour clock system and with
which symbol to separate hours and minutes.
• Clock type — Define the clock type.
• Clock alarm tone — Select the tone for the alarm clock.
• Alarm snooze time — Define the snooze time for the
alarm clock.
• Workdays — Define the days of the week that are work
days for you.
• Automatic time update — Update the time, date, and
time zone information automatically (network service).
Accessory settings
Select Menu > Ctrl. panel > Settings and General >
Enhancement.
To define which profile is activated when you attach an
accessory to your device, select the accessory and Default
profile.
To set the device to answer phone calls automatically after
5 seconds when an accessory is attached, select the
accessory and Automatic answer > On. If the ringing
type is set to Beep once or Silent in the selected profile,
automatic answering is disabled.
To illuminate the device while it is attached to an
accessory, select Lights > On. This option is only available
for certain accessories.
Sensor settings
Select Menu > Ctrl. panel > Settings and General >
Sensors.
To set the device to silence an incoming call or snooze an
alarm when you turn the device face down, select Turning
control.
Security settings
Security settings
Select Menu > Ctrl. panel > Settings and General >
Security.
Select from the following:
• Phone and SIM card — Edit the security settings for
your device and SIM card.
• Certificate management — Manage your security
certificates.
• Protected content — Edit your settings for DRM-
protected content.
• Security module — Manage your security module.
Avoid using codes that are similar to emergency numbers
to prevent accidental dialing of the emergency number.
Codes are shown as asterisks. When you change a code,
enter the current code, then the new code twice.
Device and SIM card security
To change the PIN code, select Phone and SIM card >
PIN code. The new code must be 4 to 8 digits long. The
PIN code protects your SIM card against unauthorized use
and is provided with the SIM card. After three consecutive
incorrect PIN code entries, the code is blocked and you
119
Settings