Filter
Top Products
authorization is needed. Use this status for your own
devices, such as your compatible headset, PC or devices
that belong to someone you trust.
indicates
authorized devices in the paired devices view.
• Set as unauthorized — Connection requests from this
device must be accepted separately every time.
To cancel a pairing, scroll to the device, and select
Options > Delete.
If you want to cancel all pairings, select Options > Delete
all.
Receive data using Bluetooth
connectivity
When you receive data through Bluetooth connectivity, a
tone sounds, and you are asked if you want to accept the
message. If you accept,
is displayed, and the item is
placed in the Inbox folder in Messaging. Messages received
through Bluetooth connectivity are indicated by
.
Tip: If your device notifies you that the memory is
full when you try to receive data through Bluetooth
connectivity, change memory card as the memory
where the data is stored.
Block devices
Select Menu > Ctrl. panel > Connectivity >
Bluetooth.
To block a device from establishing a Bluetooth
connection to your device, open the Paired devices tab.
Scroll to a device you want to block, and select Options >
Block.
To unblock a device, open the Blocked devices tab, scroll
to a device, and select Options > Delete.
To unblock all blocked devices, select Options > Delete
all.
If you reject a pairing request from another device, you are
asked if you want to block all future connection requests
from this device. If you accept the query, the remote device
is added to the list of blocked devices.
Remote SIM mode
Before the remote SIM mode can be activated, the two
devices must be paired and the pairing initiated from the
other device. When pairing, use a 16-digit passcode and
set the other device as authorized.
To use the remote SIM mode with a compatible car kit
enhancement, activate Bluetooth connectivity and enable
the use of the remote SIM mode with your device. Activate
the remote SIM mode from the other device.
When the remote SIM mode is on in your device, Remote
SIM mode is displayed in the standby mode. The
connection to the wireless network is turned off, as
indicated by
in the signal strength indicator area, and
you cannot use SIM card services or features requiring
cellular network coverage.
When the wireless device is in the remote SIM mode, you
can only use a compatible connected enhancement, such
as a car kit, to make or receive calls. Your wireless device
will not make any calls while in this mode, except to the
emergency numbers programmed into your device. To
58
Connectivity