Filter
Top Products
145
Connectivity
Setting up connection
z Main menu > Connectivity > Modem
1. Align the infrared port of your phone with the infrared port of the
computer
2. [192] to scroll to Connect via infrared 7 [0]
To use Bluetooth, you must start the Bluetooth connection from
the computer or device to which you are connecting. To
prepare your phone to connect via Bluetooth, see “Setting up
Bluetooth” on page 146
To use USB cable, you must start the connection from the
computer or device to which you are connecting
3. The phone confirms when a connection is established
Connecting to Internet
1. Now you can create a new GPRS connection. For example, on
the computer, select Start > Programs > Accessories >
Communications > Dial-Up Networking > Make New
Connection. For specific instructions, see your computer’s on-
line help
2. Enter X800 as the name you are dialling, and choose Standard
33600 bps Modem as the device then select Next. Choose
115200 as the Maximum speed. In the telephone number field,
enter *99# then click Finish
3. Go to Start > Setting > Control Panel > Modems. Click on
appropriate Modem > Properties. Go to Advanced Tab and
enter the command AT+CGDCONT=1, “IP”, “APN”, 0, 0.
Replace APN with the access point name that you have
received from your service provider. Click OK
Note: To close the connection, [6] (Disconn.). If there is an on-going data
call, the call is ended first.