Filter
Top Products
49
Settings
*
1
Available only for Data call.
GPRS settings
z Main menu > Settings > Settings > Connection > GPRS
1. [192] to scroll to GPRS connection or Access point 7 [0]
Proxy port number Enter the proxy port number for access point.
Use callback*
1
Select Yes to use dial back servers.
Callback type*
1
Select Use server no. for callback, or Use other
no.
Callback number*
1
Enter the phone number the callback server
should use.
Use PPP
compression*
1
Select Yes to use PPP (Point-to-Point Protocol)
compression.
Use login script*
1
Select Yes to use login script defined in Login
script field.
Login script*
1
Enter the login script to be used.
Modem
initialisation*
1
If desired, enter a modem initialisation string (AT
command string).
Note: If your service provider has protected some of your settings, you may
not be able to modify them.
GPRS
connection
Choose When needed to connect to GPRS service only
when you open an application that uses GPRS. After you
close the application, GPRS service will disconnect.
Choose When available to stay continuously connected
when you are in a GPRS service area, in which the
GPRS icon replaces the signal strength icon p.
Access point
Choose an access point supplied by your service
provider to use the phone as a modem to enable GPRS
connection from a computer.