Filter
Top Products
Connections 96
Manually Add a New Network
Connection
1. From a Home screen, touch Apps ➔ Settings
➔
Connections ➔ Wi-Fi.
2. Touch OFF/ON button to enable Wi-Fi.
3. Touch Add Wi-Fi network.
• Enter the Network SSID. This is the name of your
Wireless Access Point.
• Touch the Security field and select a security option.
This must match the current security setting on your
target WAP.
• If secured, you will also need to enter your WAP’s
password.
• Touch Show advanced options, if you need to add
advanced options such as Proxy settings, IP settings, or
Key management.
4. Touch Connect to store the new information and
connect to your target WAP.
Note: The next time your device connects to a previously
accessed or secured wireless network, you are not
prompted to enter the WAP key again, unless you reset
your device back to its factory default settings.
Turning Wi-Fi Off
1. From a Home screen, touch Apps ➔ Settings
➔
Connections ➔ Wi-Fi.
2. Touch OFF/ON button turn off Wi-Fi.
Note: Use of wireless data connections such as Wi-Fi and
Bluetooth can cause an added drain to your battery and
reduce your use times.
Manually Scan for a Wi-Fi Network
1. From a Home screen, touch Apps ➔ Settings
➔
Connections ➔ Wi-Fi.
2. Touch Scan. All available Wi-Fi networks are
displayed.