Filter
Top Products
Applications 165
4. Enter your current postal code and tap
Done
. This code
must correspond to the location of your desired TV and
set top box.
5. From the
Find your TV service
screen, select your
service provider from the list.
6. On the Personalize screen, tap Personalize to
personalize program suggestions or Skip to skip this
step.
7. At the PEEL DISCLAIMER screen, tap Agree to accept
the disclaimer.
8. From the top of the main screen, tap (
Remote
Control
) ➔
Set up now
.
9. From the
Select your TV brand
screen, tap your TV’s
manufacturer name.
•
If you have a brand of TV not listed or you are using a
projector, select from one of the following two options.
Choose from either
Show other brands
or
I have a home
projector
.
10. Aim your device at the TV and tap (
Power
) to
confirm the set up process completed successfully and
the correct TV IR codes were selected.
Note:
The process of the initial TV activation can take up to 10
seconds. Please do not press the button again.
11. If the TV turned on, tap
Yes, this code 1 works
.
– or –
If the TV did not turn on after tapping (
Power
) and
waiting 10 seconds, tap
No, test next code 2
or
Send this
code 1 again
.
12. From the
Select your channel source
screen, select the
entry that corresponds to your current channel control
method:
• Set-top box
: selected when changing channels is done via a
receiver box. Channels are not changed via the TV remote
but rather through the receiver/box.
• My xxx TV
: selected when a signal is fed directly into the TV
and no box is used. Channels are changed directly on the TV
by using the TV remote and not a box’s remote.
Note:
Try matching your current channel selection method.
13. Select the receiver box brand from the available list.