Filter
Top Products
Call Functions 51
•
Speaker
: routes the phone’s audio through either the speaker or
through the earpiece.
–
Tap
Speaker
to route the audio through the speaker. (You can
adjust the speaker volume using the volume keys.) A green line
will appear under the Speaker button.
–
Tap
Speaker
again
to use the phone’s earpiece (see
“Using
the Speakerphone During an Active Call”
on page 53). The
green line will turn grey when Speaker is not activated.
•
Mute/Unmute
turn the onboard microphone either on or off.
–
Tap
Mute
during a call to mute the microphone. A green line
will appear under the Mute button.
–
Tap
Mute
again to unmute the microphone. The green line will
turn grey when Mute is not activated.
•
Headset
connects to a Bluetooth headset.
–
Tap
Headset
during a call to activate a Bluetooth headset. A
green line will appear under the Headset button.
–
Tap
Headset
again to de-activate the Bluetooth headset. The
green line will turn grey when the Headset is not activated.
•
Press
for more options:
–
Contacts
: allows you to go to your Contact list.
–
Memo
: allows you to jot down a memo during a call.
–
Noise Suppression On/Off
: allows you to turn on the Noise
Suppression feature when you are in a noisy area. Turn it Off
when not needed to conserve battery power.
Placing a Call on Hold
You can place the current call on hold at any point during a
conversation. You can also make another call while you have
a call in progress if your network supports this service.
1. While on a call, tap Hold . This action places the
current caller on hold (which is displayed on-screen as
a greyed-out box).
2. You can later reactivate this call by tapping Unhold.
To make a new call while you have a call in progress
1. Tap Hold .
2. Tap
Add call
to display the dialer.
3. Enter the new number and tap
.
Once connected, the active call will appear in a large
box in the middle of your screen and the call on hold
will appear in a small box in the upper right corner of
your screen.