Filter
Top Products
Call Functions 34
Voice Commands
• Lookup <Name>: Open the contact record for any name in your Contacts List.
• Play <Playlist>: If the exact name of a playlist (saved in My Music) is spoken, the
song in that playlist will begin to play. Otherwise you will be prompted to play All
Songs or the names of playlists saved in My Music, or to go to the My Music
screen.
• Go to <Menu>: Open certain menus or applications installed on your device.
• Check <Item>: Provides details of your phone status, Voicemail, Messages,
missed calls, time, battery level, signal strength, and volume level.
• My Account: Provides detail information about your Verizon Wireless account.
• Help Guide: Provide helpful information on how to use VoiceSignal.
Note: All voice command sound plays through the speakerphone.
Call Name Dialing
To use Name Dial, you’ll need to have entries stored in your Contacts list. See page
54 for information on creating a Contacts list.
1. From the main screen, press and hold the key.
2. After a brief pause, a list of optional commands appears in the display and
the audio prompt “Please say a command” plays through the
speakerphone.
3. As one command, say “Call” followed by a contact entry or phone number.
For example, you could say “Call John Smith," “Call John Smith’s Mobile,”
or "Call John Smith at Work." at a distance of 3-12 inches from the phone
in a natural voice. The name that you said is repeated through the
speakerphone and your phone dials the number.
4. If you only say "Call," then “Please say the name, number, voicemail or last
number” plays through the speakerphone.
5. To use Name Dialing, say the name of the contact that you want to dial.
6. The name that you said is repeated through the speakerphone and your
phone dials the number.
7. If VoiceSignal is not sure of the number that you said, a list of possible
matches appears in the display.
8. You’re asked to confirm the correct number as VoiceSignal displays the
results. Say “Yes” or “No” to confirm or reject the number when prompted.
You may also say "Cancel" to exit VoiceSignal, or, "Repeat" to restart
VoiceSignal from the beginning.