Filter
Top Products
35
9.
The location is repeated through the speakerphone and your phone dials
the number.
Tip: VoiceSignal voice-activates the entire contact list according to the spelling of the entire name field of
each contact entry. Remember to say the entire name of the contact you want to dial, exactly as it is
spelled in the contact list.
If VoiceSignal has difficulty recognizing a particular name, try editing the contact name to make it
unique. Often times, adding a last name into the name field of the contact entry will help. Avoid using
abbreviations or unusual spellings in the name field of any contact you wish to name dial.
Call Digit Dialing
Digit Dial allows you to dial any phone number by simply speaking the digits into the
phone. No training is necessary, and Digit Dial is programmed to understand natural
speech.
1. From the main screen, press and hold the key.
2. After a brief pause, a list of optional commands appears in the display and
the audio prompt “Please say a command” plays through the
speakerphone.
3. As a single command, say “Call” followed by a valid 10-digit phone
number, such as “Call 111-222-3333”, at a distance of 3-12 inches from
the phone in a natural voice. For best results, speak the sequence of digits
naturally and do not pause between each digit. The digits that you say are
repeated through the speakerphone and your phone dials the number.
4. If you only say "Call," then “Please say the name, number, voicemail or last
number” plays through the speakerphone.
5. Say the area code and number that you want to dial into the microphone,
clearly and naturally. The number that you said is repeated through the
speakerphone and your phone dials the number.
6. If VoiceSignal is not sure of the number that you said, a list of possible
matches appears in the display.
7. You’re asked to confirm the correct number as VoiceSignal displays the
results. Say “Yes” or “No” to confirm or reject the number when prompted.
Note: For dialing 911 or other special service or emergency numbers, you must use the keypad.
VoiceSignal will not recognize 911 or other special service numbers.