Filter
Top Products
Call Functions 36
Voice Commands
Send Message
Send <Msg Type> lets you begin composing any of the following types of messages
by simply speaking the type of message and digits or a Contact name into the
phone:
• Text
• Picture
• Video
1. From the main screen, press and hold the key.
2. A list of commands appears in the display and the audio prompt “Please
say a command” plays through the speakerphone.
3. Say “Send” (for a Text, Picture, or Video message) or “Send” and a
message type (“Text”, “Picture”, or “Video”) as a single command. “Please
say the name or number” plays through the speakerphone.
4. Say a name exactly as it is displayed in your Contacts list, first name
followed by last name; or say an area code and number into the
microphone, clearly and naturally. The number that you said is repeated
through the speakerphone.
5. The CREATE MESSAGE screen appropriate to the message type you said
into the microphone appears in the display with the name or number you
said entered in an address field.
6. Complete and send your message. See “Creating and Sending Text
Messages” on page 67 for more information.
Name Lookup
To perform a name lookup, you’ll need to have some entries in your Contacts list.
1. From the main screen, press and hold the key.
2. A list of commands appears in the display and the audio prompt “Please
say a command” plays through the speakerphone.
3. In a single command, say “Lookup” followed by the name of a contact
entry at a distance of 3-12 inches from the microphone. For example, you
could say “Lookup John Smith."
4. If you only say “Lookup”, “Please say the name” plays through the
speakerphone.
To use Lookup, say the name of the contact that you want to look up.