Filter
Top Products
Settings 33
Activate a Connection
1. Press and tap > > More settings.
2. Tap the ON/OFF slider to turn Wi-Fi direct On .
3. Tap Wi-Fi Direct to set up a peer-to-peer connection over Wi-Fi.
While Wi-Fi Direct
mode is On, Wi-Fi Direct is on displays in the Status bar.
Note: The target device must also have Wi-Fi Direct service active and running before it can
be detected by your device.
Assign a Unique Name
1. Press and tap > > More settings > Wi-Fi Direct.
2. Tap > Device name.
3. Modify the current name and then tap OK.
VPN
If you want to send and receive email messages through an ISP (Internet Service Provider)
account (such as Outlook), or if you wish to use your device to access your corporate email
through a VPN (Virtual Private Network), you will first need to set up an IMAP or POP account.
Before you add a VPN you must determine which VPN protocol to use: PPTP, L2TP/IPSec
PSK, L2TP/IPSec RSA, IPSec Xauth PSK, IPSec Xauth RSA, or IPSec Hybrid RSA.
Note: You must configure a PIN or alphanumeric password before using credential storage
functions.
1. Press and tap > > More settings.
2. Tap VPN > Add VPN network.
3. Enter a name for the VPN network in the Name field.
4. Select a VPN type from the Type drop-down menu. The options are:
PPTP (Point-to-Point Tunneling Protocol)
L2TP/IPSec PSK (Layer 2 Tunneling Protocol / Internet Protocol Security Pre-Shared
Key)