Filter
Top Products
8. NBDP PREPARATIONS
8-3
3. With [Channel] selected, enter a channel number.
Note 1: 100 channels can be registered. When you attempt to register more, the
message "Channel memory is full. Press any key to escape." appears. In this case
delete unnecessary channels to register new ones.
Note 2: If the channel entered already exists, the message "Channel by that num-
ber already exists. Press any key to escape." appears. Press any key then enter
another number.
4. Press the ↓ key to select [Tx Freq]. Enter TX frequency.
5. Press the ↓ key to select [Rx Freq]. Enter RX frequency.
6. Press the Enter key. The [OK/Cancel] confirmation window appears.
7. Press the Enter key. Channel number entered appears in the [Channel List].
8. Press the Esc key to close the menu.
8.2.2 How to edit/delete user channels
1. Press the function key F5 then the 4 key to open the [User Channel Entry] screen.
2. Press the ↓ key to select a channel from the [Channel List].
3. Press the → key then the ↓ key to select [Change] and press the Enter key.
4. Do one of the following:
Edit channel: Use the ↑, ↓ and Backspace keys to make corrections.
Delete channel: Erase channel number with the Backspace key.
5. Press the Enter key twice.
6. Press the Esc key.
8.3 Station List
The station list stores up to 50 stations, one frequency pair (RX and TX) per station.
For stations which have more than one frequency pair, you can add a suffix to the sta-
tion name to denote multiple frequency pairs. For example, station name FURUNO
followed by -1, -2, -3, etc. for each frequency pair required.
8.3.1 How to register stations
1. Press the function key F5 then the 1 key to open the [Station Entry] screen. On
the right side of the screen, [Create] and [Change] are shown.
Station
IB-583
Station
IB-585