Filter
Top Products
1. OPERATIONAL OVERVIEW
1-8
How to switch sessions
When one session is active and another message arrives, a new session for the re-
ceived message does not start automatically. Only one session can be active. For ex-
ample, when you are transmitting a DSC message and another message arrives, the
option [ACTIVE] appears to indicate the start of a new session.
[SELECT AN ACK]
INDIVIDUAL MSG ELAPSED TIME : 00H00M58S
FROM : 123456789
CAPTAIN_2575
COMM MODE : TELEPHONE
COMM FREQ : TX 2170.0 / RX 2170.0 kHz
ACTIVE INFO PRINT QUIT
TX 2182.0/ RX 2182.00 kHz
RT
Press the TAB key to move
the cursor to the tab area.
To select a session, press the
TAB key. The cursor is here.
[RT : SSB] CH : 200
TX : 2182.0 kHz
RX : 2182.00 kHz
Information for the session
selected by cursor.
With [ACTIVE] selected, push the ENTER knob to switch
the active session. To switch the option for the session
(ACTIVE, INFO, PRINT, QUIT), rotate the ENTER knob.
User options area
Tab area
(Continued on next page)
Information for the session
underlined in blue (RT in
this case)
[SELECT AN ACK] ELAPSED TIME:
INDIVIDUAL MSG 00H01M12S
FROM :
123456789 CAPTAIN_2575
COMM MODE :
TELEPHONE
COMM FREQ : TX 2170.0 /RX 2170.0 kHz
INFO PRINT HOLD QUIT
ACCEPT UNABLE PROPOSE
TX 2177.0/ RX 2177.00 kHz
RT
Only the screen for
the selected
session appears.
To finish this session, rotate the ENTER knob to
select [QUIT] then push the knob.
Note: When waiting for the ACK, that is, the
session is in progress, the confirmation message
appears. Rotate the ENTER knob to select [YES]
or [NO] then push the knob.