Filter
Top Products
10. NBDP TRANSMISSION, RECEPTION
10-4
2) Press the function key F8 to transmit your own identity (answerback code).
3) Press the function key F3 then the 3 key to open the [Send File] window.
4) Press the ↑ or ↓ key to select the file to send and press the Enter key.
5) Press the Enter key again.
Sending volume (percentage of message transmitted, counts upward as the
message is being transmitted), ARQ error count and ARQ transmission time
appear on the screen. "Lock" appears in reverse video when the mark and
space signals in the received signal are normal. [Error] shows the number of
errors found during transmission. [ARQ Time] is the time in seconds the com-
munication connected.
6) After the message is transmitted, press the function key F10 to disconnect the
line.
How to type a message from the keyboard
1) After exchanging answerback code by the function keys F7 and F8, type your
message directly from the keyboard.
2) To change the direction of traffic, press the function key F9, or + and ? in or-
der. The other station becomes the information sending station, your station
becomes the information receiving station. Receive a message from the
sending station.
3) After you have completed communications, press the function key F7 to re-
quest the answerback code of the other station.
4) Press the function key F8 to transmit your own answerback code.
5) Press the function key F10 to disconnect the line.
Note: When you are requested to change the direction of traffic while transmitting a
message, or communication is interrupted because of an error, some of the final char-
acters on the screen may not be sent to the receiving station.
How to stop transmission
1. Press the function key F3 then the 4 key. The message "Canceled Sending" ap-
pears on the screen. Transmission is stopped but the line is still connected.
2. Press the function key F10 to disconnect the line.