Filter
Top Products
2. SSB RADIOTELEPHONE
2-2
Channel
1. Rotate the ENTER knob to select [CH] on the RT screen then push the knob. You
can also show the channel setting window by pressing the RT/CH key.
2. A channel can be entered directly with the numeric keys, or by using the ENTER
knob. See below for details.
Enter channel with the numeric keys:
Use the numeric keys to enter channel then push the ENTER knob.
Select band and band channel with the
ENTER knob:
1) Use the or key to place the cursor in the band or band channel position,
whichever you want to change.
2) Rotate the ENTER knob to set band or band channel desired.
3) Push the ENTER knob to close the setting window.
Frequency
1. Rotate the ENTER knob to select [TX] or [RX] then push the knob.
2. Enter frequency by one of the methods below.
Enter frequency with the numeric keys:
Use the numeric keys to enter frequency then push the ENTER knob. For exam-
ple, to enter 2161 kHz, key in 2, 1, 6, 1, 0. (Note: Keying in 2-1-6-1 sets 216.1
kHz.) Be sure to include zero for 100 Hz place.
Select frequency with the
ENTER knob (for RX only):
1) Use the or key to change the range which the cursor covers.
2) Rotate the ENTER knob to set frequency desired.
3) Push the ENTER knob to close the setting window.
Note: When TX and RX frequencies are different, first enter TX then enter RX.
Channel setting
window
Cursor position for selection of band channel
2 0 0
Cursor position for selection of band
2 0 0
2 4 6 8 12 16 18 22 25 01 02----- 029
ITU band
User band
Setting Range
ITU Band (SSB, TLX): 2/4/6/8/12/16/18/22/25
ITU Band (CW): 4/6/8/12/16/22/25
User Band: 01-029 (First zero is necessary)
ITU Channel (SSB): 00 - XX
ITU Channel (TLX): 000 - XXX
ITU Channel (CW): 001 - XXX
User Channel: 01 - 99
2182.0
TX
RX
2182.00