Filter
Top Products
5. DSC GENERAL MESSAGE CALLING, RECEIVING
5-13
[CIRCLE]: Using the numeric keys, enter latitude and longitude of reference point
and radius of area. To change coordinate, select it and press the 1 key for North
or East; 2 key for South or West. After entering data, push the ENTER knob.
[QUADRANT]: Using the numeric keys, enter latitude and longitude of reference
point and southerly degrees and easterly degrees of area. To change coordinate,
select it and press the 1 key for North or East; 2 key for South or West. After en-
tering data, push the ENTER knob.
6. With [PRIORITY] selected, push the ENTER knob.
7. Rotate the ENTER knob to select [SAFETY] or [URGENCY] then push the knob.
8. With [COMM MODE] selected, push the ENTER knob.
9. Rotate the ENTER knob to select [TELEPHONE] or [NBDP-FEC] then push the
knob.
10. Rotate the ENTER knob to select [DSC FREQ] then push the knob.
11. Rotate the ENTER knob to select DSC frequency desired then push the knob. The
communication frequency changes in conjunction with DSC frequency. If you
change the communication frequency, go to step 12. If not, go to step 15.
12. Rotate the ENTER knob to select [COMM FREQ] then push the knob.
13. Rotate the ENTER knob to select [FREQUENCY] or [CHANNEL] then push the
knob.
14. Referring to "How to set working channel, frequency" on page 5-3, set the fre-
quency or channel.
15. Rotate the ENTER knob to select [GO TO CALL] then push the knob to send the
call.
16. Communicate by radiotelephone or NBDP (see "How to send message by NBDP
terminal unit" on page 5-5).
17. After you have completed communications, rotate the ENTER knob to select
[QUIT] in the user options area then push the knob.
2187.5 kHz
4207.5 kHz
6312.0 kHz
8414.5 kHz
12577.0 kHz
16804.5 kHz
2187.5/ RX 2187.50 kHz
[SENDING]
ELAPSED TIME:
AREA MSG 00
H
00
M
04
S
AREA :
34
°
00 ’ N / 135
°
00 ’ E 0500NM
COMM MODE :
TELEPHONE
COMM FREQ :
TX 2182.0 /RX 2182.0
kHz
INFO PRINT