Filter
Top Products
Charging the battery
The battery is partially charged when shipped. Before you turn on and start using
myTouch 4G Slide, it is recommended that you charge the battery. Some batteries
perform best after several full charge/discharge cycles.
§ The battery is already installed in myTouch 4G Slide when shipped. A thin film is
inserted between the battery and the compartment. You need to remove this film
before you can charge the battery.
§ Only the power adapter and USB sync cable provided in the box must be used to
charge the battery.
§ Do not remove the battery from myTouch 4G Slide while you are charging it using
the power or car adapter.
1. Plug the power adapter into the USB connector.
2. Plug in the power adapter to an electrical outlet to start charging the battery.
As the battery is being charged, the notification LED shows a solid orange light. The
light turns to solid green when the battery is fully charged.
When you charge the battery and myTouch 4G Slide is on, the charging battery icon
is displayed in the status bar. After the battery has been fully charged, the
charging battery icon turns to a full battery icon .
As a safety precaution, the battery stops charging when it overheats.
16 Getting started