Filter
Top Products
15
PHONE BASICS AND MANAGING
CALLS
SWITCHING THE PHONE ON AND OFF
Press and hold .
MAKING CALLS
Check that phone is switched on, signal strength icon displays at
least one bar , and your network operator logo displays before
dialling a call.
Type in the Phone Number to Dial
1. From standby mode, enter the area code and phone number,
and press .
2. To end the call, press .
Use a Contact Card to Dial
From Contacts application:
1. Scroll to desired name card, press .
• If the card has several phone numbers stored, select the
one you wish to dial.
To add information to your Contacts, see page 35 .
Note: If your SIM card is PIN protected, your PIN code will be
requested. Enter the PIN code and press
OK
.
See Security
Settings on page 122.
Note: To erase a digit, press .
During a call, scroll or to adjust earpiece volume.
Warning: Closing the flip during a call DOES NOT END THE CALL,
when set to default. Opening the flip again allows you to
return to your previous conversation. To set the phone to end
the call when you close the flip, see Active clamshell in Call
Settings on page 117.