Filter
Top Products
Call Functions 22
4.
When the second party answers, press to connect all
three parties.
Manual Pause Calling
To manually call a number with pause(s) without storing it in your
Contacts list:
1. In standby mode, enter the number you wish to call.
2. Press the Options soft key. The following pause options
appear in the display:
•
2-Sec Pause
— A 2-second pause after which dialing resumes.
•
Wait
— A hard pause (waits for input from you).
3. Highlight the desired pause.
4. Press the key or the key to enter the highlighted
pause into the number sequence.
5. Press to call the number.
Tip:
Press the Save soft key to store pauses along with the number if you
plan to call the number frequently.
Speed Dialing
Speed Dialing lets you place a call to any Contact stored in your
Contacts list by dialing the Contact’s Location number.
1-Touch Dialing
Use 1-touch dialing to speed dial Contacts from 1 (Voicemail)
through 9.
ᮣ
In standby mode, press and hold the number key
corresponding to the desired Contact’s speed dial number.
Example:
To speed dial the Contact assigned speed dial 5, press and hold
or .
2-Touch Dialing
Use 2-touch dialing to speed dial Contacts from 10 through 99.
1. In standby mode, press and release the number key
representing the first digit of the desired Contact’s speed
dial number.
2. Press and hold the number key representing the second
digit of the desired Contact’s speed dial number.
Example:
To speed dial the Contact assigned speed dial 35, press or
then press and hold or .
3-Touch Dialing
Use 3-touch dialing to speed dial Contacts from 100 through 999.
r560.book Page 22 Tuesday, June 16, 2009 1:04 PM