Filter
Top Products
43
Note:
You can enter multiple Waits to extend the length of a pause. For
example, two consecutive Waits cause a total pause time of four
seconds. Keep in mind that pauses count as digits towards the 32-digit
maximum.
To add pauses to a Contacts entry number, do the following:
1. Find the Contacts entry associated with the number you
want to include one or more pauses. (See “Finding a
Contacts Entry” on page 39 for more information.)
2. Select and edit the desired number. (See “Editing a
Contacts Entry” on page 42 for more information.)
3. Press the Options soft key. The following pause options
appear in the display:
•
Wait
— A hard pause (waits for input from you).
•
2-Sec Pause
— A 2-second pause after which dialing resumes.
4. Select the desired pause to add it to the number sequence.
5. When you’re finished entering information, press or
to store the number to Contacts.
Pause Dial from Contacts
1. If you stored the number using 2-second pause(s), simply
recall the number from Contacts.
2. If you stored the number using Wait(s), recall the number
from Contacts and wait for the appropriate prompt from
the dialed number.
3. Press to dial the number.
Edit an Existing E-mail Address
1. Find the Contacts entry you want to edit. (See “Finding a
Contacts Entry” on page 39 for more information.)
2. Highlight the desired Contacts entry, then press the Edit
soft key.
The Edit Contact screen appears in the display.
3. Highlight the Email field.
4. Use either keypad to edit the e-mail address. (See
“Entering Text” on page 34 for more information.)
5. Press or to save your changes.
Assigning a Picture to a Contacts Entry
When you assign a picture to a Contacts entry, the picture you
assign appears in the display when you receive a call from that
Contact.
1. Find the Contacts entry you want to edit. See “Finding a
Contacts Entry” on page 39 for more information.
r560.book Page 43 Tuesday, June 16, 2009 1:04 PM