Filter
Top Products
92
Section 6: Getting ConnectedSection 6: Getting Connected
Section 6: Getting ConnectedSection 6: Getting Connected
To increase security of the Wi-Fi network:
The LEAP (Lightweight Extensible Authentication Protocol)
feature of Wireless LAN increases security on your device, and
ensures that nobody is able to access your network without
your permission.
1. On the Wi-Fi Settings screen, tap the LEAP tab.
2. Tap New. By default, the LEAP screen displays data that
you entered previously. However, you can modify or delete
the data as required by tapping Modify or Delete.
3. Enter the SSID (Service Set Identifier), user name,
password, and domain.
4. Select an Authentication Type. By default, the setting for
your device is Open System
Note:
For LEAP to work correctly, both the access point and the re-
ceiving device (your device) must be set with the same SSID,
user name, and password.
Check for a Wireless LAN Signal
You can check the current wireless connection status from the
following three screens of your PPC-6700:
Today screen. If your device detects
a WLAN network connection, the
WLAN connection icon ( ) appears
at the top of the Today screen.