Filter
Top Products
18 Getting Started
Install the microSD™ card (not included)
If you need more storage for your device, you
can use a microSD™ card (not included) to save
media and other files.
1. Pry open the rubber cover at the bottom-
left side of the device.
2. Insert the microSD card with the gold
contacts facing up.
3. Close the rubber cover.
Tip Press the microSD card to pop it out of the
slot.
1.3 Starting Up
Turn your device on and off
To turn on the power
Press and hold the POWER button for a few seconds.
When you turn on your device for the first time, a Quick Start Wizard will guide you through the calibration
process and the setup of regional settings, date and time, and password. For more information about touch
screen calibration, see “Calibrate the device”.
To turn off the power
Press and hold the POWER button for a few seconds. A message will then be displayed, prompting you
whether or not to turn off the device completely.
Calibrate the device
Calibrating the touch screen involves tapping the center of a cross with the stylus as the cross moves around
the screen. This process ensures that when you tap the screen with your stylus, the tapped item is activated.
If your device does not accurately respond to screen taps, follow these steps to re-calibrate it:
1. Tap Start > Settings > System tab > Screen.
2. On the General tab, tap Align Screen, then follow the onscreen instructions to complete the
calibration.
Manage screen settings
The device’s display has the following orientation modes: Portrait and Landscape. To change the orientation,
tap Start > Settings > System tab > Screen, and select the orientation you want.
Tip To quickly change the screen orientation, you can also tap the Rotate Screen icon in HTC Home’s Launcher. See
“HTC Home” later in this chapter for details.
To smooth the edges of screen fonts for many programs, on the ClearType tab, select the Enable ClearType
check box.
To increase the readability or to see more content on the screen, on the Text Size tab, adjust the text size by
moving the slider.