Filter
Top Products
Settings
177
For each profile, the following options are available when you select
New or Edit from the Options soft key menu:
♦Set name: Enter a profile name. The default profiles are named
GoRogers, RogersMedia, and RogersInternet.
♦Access name: Edit the access point name. This is the gateway
address required to access the Internet.
♦Auth type: Select the type of authentication used for this WAP
connection: None, Normal, or Secure.
♦User ID: Enter the User ID required to connect to the network.
♦Password: Enter the user password required to connect to the
network.
♦Protocol: Set the connection protocol used by the WAP browser:
WAP, HTTP, or Other.
♦Home URL: (WAP or HTTP only) Enter the URL address of the
page to be used as your homepage.
♦Gateway address: (WAP only) Enter the gateway address of the
proxy server.
♦Proxy address: (HTTP only) Set the proxy server address. If you
do so, you must also specify the port. See next option setting.
♦Port: (HTTP only) Enter the connection port.
♦Linger time: Set a time period after which the network is
disconnected if there has been no new data traffic in that time.
♦Advanced settings: Allows you to configure some of the
IP-specific information: Static IP, Static DNS, Server information,
and Traffic Class.
♦Static IP: Specify if you want to manually enter an IP address.
If you want the IP address to be automatically assigned by the
server, remove the checkmark.
♦Local phone IP: Enter the IP address obtained from the
network operator. This option is available only if you checked
the Static IP option.
♦Static DNS: Specify if you want to manually enter the Domain
Name Server (DNS) address. If you want the address to be
automatically assigned by the server, remove the checkmark.
♦Server 1/Server 2: Enter the Domain Name Server (DNS)
addresses.