Filter
Top Products
Call Functions
28
♦Switch to video call: Changes the call from a voice call to a video
call if supported and if the person on the line is properly equipped.
For more information on video calls, see “Video Calling” on
page 33.
♦End call: Allows you to end the current call.
Putting a call on hold
You can place the current call on hold whenever you want. You can
make another call while you have a call in progress if your network
supports this service.
♦To place a call on hold, press the Options soft key and select Hold.
You can reactivate the call whenever you want, by pressing the
Resume soft key.
To make a call while you have a call in progress:
1. To place a call on hold, simply press the Options soft key and
select Hold. Your current call is placed on hold.
2. Enter the phone number that you wish to dial.
3. Press the key to dial the second call.
♦When you have an active call and another call on hold, you may
switch between the two calls, placing the active call on hold.
Select Swap from the Options soft key menu.
The current call is placed on hold and the call on hold is
reactivated so that you can continue conversing with the other
person.
4. When you want to finish, end each call by pressing the key.