Filter
Top Products
43
3.
Use the Navigation key to review the information for the
entry that you wish to change, then press
EDIT
( ). The
Edit Contact
screen appears in the display.
4. Use the Navigation key to highlight the particular
information you want to add or change.
•
Press to backspace and delete numbers or letters.
•
Press and hold to clear all numbers or letters in the highlighted
field.
5. When you’re finished changing the Contacts entry:
•
To save your changes, press .
•
To discard your changes, press . You are prompted to confirm
exiting without saving your changes. Press the
Yes
soft key to
discard your changes.
•
Press the
Options
soft key.
The following options pop-up in the display:
–
Send Message
— Create and send a Text/Picture/Video message to
the selected Contact.
–
Call
— Calls the selected contact.
–
Send Name Card Via Bluetooth
— Sends a name card to the
selected contact using Bluetooth.
Add Pauses to Contacts Numbers
Calls to automated systems such as banking services often
require a password or account number. Instead of manually
entering these numbers, you can store them in a Contacts entry
with the phone number and with special characters called
pauses, up to a maximum of 32 digits.
•
Wait
— Stops the calling sequence until the phone receives further
input.
•
2-Sec Pause
— Stops the calling sequence for two seconds, then
sends the remaining digits.
Note:
You can enter multiple 2-Sec Pauses to extend the length of a pause.
For example, two consecutive 2-Sec Pauses cause a total pause time
of four seconds. Keep in mind that pauses count as digits towards the
32-digit maximum.
To add pauses to a Contacts entry number, do the following:
1. Find the Contacts entry associated with the number you
want to include one or more pauses. (For more
information, refer to “Finding a Contacts Entry” on
page 39)
2. Select and edit the desired number. (For more information,
refer to “Editing a Contacts Entry” on page 42)
3. Press
Options
. The following pause options appear in the
display:
• Set Speed Dial
— Lets you assign a Speed Dial number for this
Contacts entry.