Filter
Top Products
130 Synchronizing Information
Troubleshooting sync connection problem
In some cases, when the computer connects to the Internet or a local network, it
may disconnect the connection with your device in favor of the Internet or network
connection.
If this happens, tap Start > Settings > Connections > USB to PC, and then clear
the Enable faster data synchronization check box. This makes your computer
utilize a serial USB connection with your device.
5.5 Synchronizing via Bluetooth
You can connect and sync your device with the computer using Bluetooth.
Note To connect and sync your device with a computer via Bluetooth, your computer must
have a built-in Bluetooth or installed with a Bluetooth adapter or dongle.
To sync with a computer via Bluetooth
1. Set up Windows Mobile Device Center or ActiveSync on your computer to
sync through Bluetooth. See the program’s Help for instructions.
2. Make sure that Bluetooth on both your device and the computer are turned
on and set to visible mode. See “Bluetooth Modes” in Chapter 9 for details.
If this is the first time you have connected to this computer via Bluetooth,
you must first set up a Bluetooth partnership between your device and the
computer. For more information about creating a Bluetooth partnership, see
“Bluetooth Partnerships” in Chapter 9.
3. On your device, tap Start > ActiveSync.
4. Tap Menu > Connect via Bluetooth.
Note To conserve battery power, turn off Bluetooth when not in use.