Filter
Top Products
User Guide 29
Call a Contact
1. On the
Phone
screen, touch the
Contacts
tab.
2. Touch desired contact.
3. Touch
.
Call a Favorite Contact
1. On the
Phone
screen, touch the
Favorites
tab.
2. Touch
of your favorite contact.
To save a Favorite contact, see “Add
Contacts to Favorites” on page 34.
Call a Number with Pause
Use the Pause function to send DTMF tones
from your phone. Your phone supports two
types of pauses:
•
Hard Pause
: Add a hard pause to indicate
that the succeeding numbers are DTMF
tones. For every hard pause, a message
appears to confirm whether to send the
tones.
•
2-sec Pause
: This is a 2-second interval in
sending DTMF tones. To increase the
interval, add a succession of 2-sec pause.
For example, to have an interval of 4
seconds, add two 2-sec pause.
1. On the
Phone
screen, touch the keypad to
enter number to call.
2. To add a hard pause, touch
Menu
>
Add
wait
. “;” appears to indicate the hard pause
location. To add a 2-sec pause, touch
Menu
>
Add
2-sec pause
. “,”
appears to indicate
the 2-sec pause location.
3. Touch the keypad again to enter number of
the DTMF tone.
Note:
Repeat the above procedures to add
more pauses.
4. Touch
. Your phone dials the number
before the hard pause then sends the DTMF
tone
s upon confirmation. For 2-sec pause,
your phone will send the DTMF tones
automatically after 2 seconds.
Call a Number with Prepend
Prepend is used to add prefix numbers in front
of a phone number. For example, if your
contact entry is saved without an area code and
you are out of town, use the prepend function
to add the area code before calling the number.
1. On the
Phone
screen, touch the
Contacts
or
Call log
tab.
2. Touch and hold a name or number from the
list.
3. Touch
Prepend
.
4. Touch the keypad to enter the number you
want
to add before the phone number.
5. Touch
.