Filter
Top Products
54 Use Bluetooth
2. Select
Pin number
or
Push button
in
WPS method
.
3. If you select
Pin number
, select
SSID
, and
enter the PIN number.
4. Touch
Start
.
Check the Wireless Network Status
Do one of the following to check the
connection status of a wireless network:
• Check if the Wi-Fi icon appears on the
status bar. The lighted bars indicate the
signal strength.
•Touch
Home > Menu > Settings >
Wireless & networks
>
Wi-Fi
settings
,
and the wireless network that the device is
currently connected to. The Wi-Fi network
name, status, speed, signal strength,
security, and IP address are displayed.
Use Bluetooth
Bluetooth technology allows devices to
wirelessly exchange information over a short
distance of up to 32 feet (9.8 meters).
Bluetooth operates in three modes:
•
On
: Bluetooth is turned on. Your device
can detect other Bluetooth devices but
other devices cannot detect your device.
•
Discoverable
: Bluetooth is turned on. Your
device can detect other Bluetooth devices
and other devices can also detect your
device for 120 seconds.
•
Off
: Bluetooth is turned off. Information
cannot be sent or received when Bluetooth
is turned off.
Turn On Bluetooth
1. Touch
Home > Menu > Settings
>
Wireless & networks
.
2. Touch the
Bluetooth
check box to turn on
Bluetooth.
3. To make your device discoverable, touch
Bluetooth settings
, then select
Discoverable
check box to enable other
Bluetooth devices to detect your device for
120 seconds.
Change Device Name
The device name is the name used to identify
your device in a Bluetooth network.
1. Turn on Bluetooth.
2. On the
Wireless & network settings
screen, touch
Bluetooth settings > Device
name
.
3. Type the name of your device.
4. Touch
OK
.