Filter
Top Products
127
The log shows name of server configured, results of configuration, date and time, and
errors if any occurred during configuration.
Shortcut to stop configuration sessions
There may be times in which you do not want configuration sessions to run. Instead of
going to each server profile to set Active to not allow device management to be done
by the server, you can set the phone so that device management cannot be done by
any server.
The default setting is to allow device management to be done (Enable configurations).
From Settings menu:
1. Open Connect..
2. Open Dev Mgr..
3. Press Options and select Disable config..
• All server profiles are disabled and no configurations can be done.
To allow configurations to be done again, press Options and select Enable config..
USB
Connect to PC Software Suite over your USB cable using USB menu item.
Connect to PC Software Suite
1. Plug USB cable into the phone.
2. From the Connect. menu, open USB.
3. USB icon appears, indicating that USB connectivity has started.
4. On your computer, begin desired task such as backup or sync.
Connect to Modem
1. Plug in USB cable into the phone.
2. From the Connect. menu, open Modem.
3. Select Connect via USB.
4. USB icon appears indicating that USB connectivity has started.
5. On your computer, start a connection using the phone as a modem.
miniSD CARD (MEMORY CARD)
Backup your phone memory onto the miniSD memory card. MiniSD Cards can be
installed into the standard size memory card socket of other devices using the miniSD
Card adapter (see Using miniSD Card and miniSD Adapter on page 129). Data file
size of miniSD Card may vary with current availability.