Filter
Top Products
19
If you have activated a Bluetooth
®
handsfree headset, press Options and select BT
Accessory to hear the caller's voice in the Bluetooth
®
headset.
Volume Control
Scroll or to increase or decrease volume of phone earpiece , phone
loudspeaker , or if a headset is attached. Note the volume step bars change as you
adjust volume.
To mute or unmute the microphone, press Options and select Mute or Unmute. Mute
switches off microphone of phone and any accessory microphones if attached.
Unmute switches microphone back on.
CALL WAITING
If you activated Call waiting network service in Call Settings (see page 108), you can
answer an incoming call when on an active call.
1. During an active call, press to answer an incoming call. The active call is put
on hold.
• To switch between the calls, press Swap or .
• To end the currently active call and answer the incoming call, press Replace.
2. To end the currently active call, press . The held call becomes active.
• Or to end both calls at once, press Options and select End all calls.
• If you press and hold , all calls and data connections are ended.
To reject the incoming call, press Reject. The caller receives a busy message or goes
to voice mail.
Send DTMF Touch Tones
DTMF touch tones can be transmitted during a call just by pressing the keys (0 to 9, #,
*) on your phone. Touch tones are often used to access services such as voice
mailboxes, calling card calls, and banking.
During a call, press Options and select Send DTMF if you stored a DTMF touch tone
sequence in a Contacts card. Press Find, scroll to desired entry and select.
To dial or store touch tone sequences:
1. Type in access phone number.
2. Before entering touch tone digits, press repeatedly to scroll through *, +, p,
and w characters to insert:
• a short pause before the digits are transmitted (p character).
• a manual wait period (w character) that requires you to press Send during
the call to transmit the digits.
Earpiece icon - handsfree is not active.