Filter
Top Products
21
5.
Say one of the following number types:
•
“
Mobile
”
•
“
Home
”
•
“
Work
”
•
“
Fax
”
Voice Dial dials the specified number.
Dialing a Number
To dial a number using Voice Dial, do the following:
1. In Standby mode, press the Voice Recognition key ( ).
“Say a Command” appears in the display and is
pronounced through the speaker.
2. Say “Call”. VoiceSignal prompts you to “Say the name or
#”.
3. Speak clearly and say the telephone number of the person
you want to call. For example, say “7 8 1 9 7 0 5 2 0 0."
Voice Dial displays a choice list of up to three numbers and
prompts you with “Did you say?” followed by the first
number on the list.
4. Say “Yes” to confirm the number or “No” to hear the next
one, or use the keypad to select the correct number from
the list.
(For more information, refer to “Confirmation” on
page 89.)
•
Press to exit Voice Service without dialing.
Pause Dialing From a Contacts Entry
•
If you voice dial a contact that contains 2-sec (P) Pauses(s), wait for
the appropriate prompt(s) from the number you are calling (credit card
number, bank account number, and so on) and enter the appropriate
response(s).
•
If you voice dial a contact that contains hard (W) Pause(s), simply wait
for the pauses to pass and the dialing to complete.
Answering a Call
Your phone notifies you of a call in the following ways:
•
A ring tone sounds and/or your phone vibrates (Your phone provides
eight ring volume settings including:
Silence All
,
Alarm only
,
Vibrate
only
,
1 Beep
,
Low
,
Low/Medium
,
Medium
,
Medium/High
, or
High
, and/or
different ring types to distinguish callers.)
•
A phone number (unless blocked by the caller) and a name appear in
the display (If the caller’s number and name are stored in your
Contacts list).
•
If the caller can’t be identified,
Call from unavailable #
,
Call from
restricted number
, or no number appears in the display.
•
Your phone continues to notify you of the call until one of the following
events occurs: