Filter
Top Products
Messaging 52
Tip:
You can send a Picture message to up to ten recipients. Enter each
recipient’s address or phone number in a separate
To
field of the
Picture
Msg
screen.
1. In Standby mode, press and hold the Camera key ( ).
The camera viewfinder screen appears in the display.
2. Using the display as a viewfinder, when the image that you
wish to send appears in the display, press the Camera key
( ) to take a picture.
Note:
For more information about using the camera feature in your phone,
see “Camera-Camcorder” on page 63.
3. Press the
Send
soft key. If necessary, the device resizes
your picture for sending, then the
Picture Msg
screen
appears in the display showing the
To
list.
4. Address your message as you would a Text message (see
“Creating and Sending a Text Message” on page 49), with
one addition:
•
To send this message to your Online Album, press the
Online
Album
soft key. You are returned to the
To
list.
5. When you are finished addressing your message, press the
Next
soft key. The
Picture Msg
fields screen appears in the
display with your new picture populating the
Picture
field.
6. To complete and send your message, refer to steps 4 – 11
of “Creating and Sending a Picture Message” on page 50.
Creating and Sending a Video Message
1.In Standby mode, press the
Messaging
soft key, then select
Send Message
➔
Video Message
. The
Video Msg
screen
appears in the display showing the
To
list.
Tip:
You can also access Messaging by pressing the
Menu
soft key and
selecting
Messaging
.
2. Address your message as you would a Text message (see
“Creating and Sending a Text Message” on page 49), with
one addition:
•
To send this message to your Online Album, press the
Online
Album
soft key. You are returned to the
To
list.
3. If desired, select the
Subject
field. The phone-style touch
keypad screen appears in the
display in Abc mode.
Note:
You can use any of the device’s four
text entry screens to enter your
message text. (For more information,
refer to “Changing Text Entry
Screens” on page 43.)
4. Enter the Subject text. (For
more information, refer to
“Entering Text” on page 43.)