BMC Software, Inc., Confidential and Proprietary Information
122 Application Enhancement Solutions Messages Manual
System Action: Processing continues, but the BATCH CONTROL FACILITY
(BCF) Batch Backout Assist feature is not activated.
User Response: For action 1, verify that your installation allows batch
nonauthorized job steps to obtain MVS/ESA data spaces. Action 2 may indicate too
many data spaces have been used. A maximum of 254 ALETS can be used. Have the
job log listing available if you contact BMC Software Product Support for assistance.
BMC48042I BACKOUT ASSIST ACTIVE AND BUFFERING BLOCKS
Explanation: The BATCH CONTROL FACILITY (BCF) Batch Backout Assist
feature has been activated and has received the first block to be placed in the
dynamic buffer area.
System Action: Processing continues.
User Response: This message is for your information only. No action is necessary.
BMC48043I BEGINNING BACKOUT ASSISTED READ, LOG RECORDS TO
READ = count
Explanation: The BATCH CONTROL FACILITY (BCF) Batch Backout Assist
feature has been requested to provide blocks buffered in the dynamic buffer area.
The total number of blocks in the dynamic buffer that must be processed by batch
backout is given (count).
System Action: Processing continues.
User Response: This message is for your information only. No action is necessary.
BMC48044I BACKOUT ASSIST, RECORDS PROCESSED = count, RECORDS
LEFT = count
Explanation: The backout process is progressing normally. This message
indicates the number of records processed and the number of records in the dynamic
buffer area left to process.
System Action: Processing continues.
User Response: This message is for your information only. No action is necessary.
BMC48045I BACKOUT ASSIST INTERNAL ERROR, REASON = reason
Explanation: An internal logic error was encountered during the attempt to
emulate read backwards processing for the IMS Batch Backout utility. The message
contains a reason code to provide additional information about the internal error
detected. The reason values and meanings are as follows:
1 A read backwards request was made by the IMS Batch Backout utility, but
the dynamic buffer area was empty or all of the blocks had been previously
returned.
