BMC Software, Inc., Confidential and Proprietary Information
BMC44200–BMC44299 77
BMC44205I BCF LOGGER NOT INITIALIZED, REASON = rc
Explanation: The BATCH CONTROL FACILITY (BCF) Physical Logger could
not initialize. The message contains a reason code (rc) to identify the reason
initialization was not successful. The following reason codes are possible:
01 The IMS Physical Logger initialization routine did not create the logging
environment. If the IEFRDER DD statement is specified as DUMMY,
ignore this message. If it is not specified as DUMMY, a system error has
occurred and control has returned to IMS.
Note:
This message is not issued if the IEFRDER DD statement is
specified as
DUMMY or NULLFILE.
02 A module needed for BCF Physical Logger initialization could not be
located. The action taken depends on the setting of the Physical Logger
Error option.
03 The BCF Physical Logger initialization module could not be found. The
action taken depends on the setting of the Physical Logger Error option.
04 The BCF Physical Logger attempted to initialize in an IMS region type that
is not supported by BCF. Control is returned to IMS.
05 BCF was not initialized. Control is returned to IMS.
06 The Use Physical Logger option is set to No. BCF does not attempt
initialization. Control is returned to IMS.
07 The BCF Physical Logger initialization routine has received control but
cannot initialize the logging environment. Control cannot be returned to the
standard IMS logging environment because IMS module DFSXLGI0 cannot
be located. The job step terminates.
08 The current level of IMS is not supported by BCF. The action taken depends
on the setting of the Physical Logger Error option.
09 The BCF Physical Logger is not authorized to execute at this time. The BCF
Physical Logger attempts to return control to the IMS Physical Logger.
10 The BCF Physical Logger attempted to initialize in an IMS region type that
is not supported by BCF. Control cannot be returned to the standard IMS
logging environment because IMS module DFSXLGI0 cannot be located.
The job step terminates.
11 The BCF Physical Logger attempted to initialize but found that execution of
BCF had already aborted. The BCF Physical Logger initialization
terminates, and control returns to IMS.
12 An AES module needed for the BCF Physical Logger initialization could
not be located. The action taken depends on the setting of the Physical
Logger Error option.
