Filter
Top Products
6 PREPARING TX CALLS
6-6
6. Using the numeric keys, enter latitude and longitude of reference point and southerly
degrees and easterly degrees of area. To change coordinate, choose it and press the
[1] key for North or East; [2] key for South or West. After entering data, push the
[ENTER] knob.
7. Push the [ENTER] knob to open the COM. TYPE menu.
*
Message file entry
CALL TYPE:
AREA:
34
°
00N 135
°
00W ↓10
°
→10
°
COM. TYPE
COM. FREQ
DSC FREQ
: TELEPHONE
: NO INFO
: 2M-INTL
: GROUP CALL
NBDP-FEC
TELEPHONE
8.
Rotate the [ENTER] knob to choose appropriate communications type and then push
the [ENTER] knob.
9. Push the [ENTER] knob to open the COM. FREQ menu.
*
Message file entry
CALL TYPE:
AREA
COM. TYPE
COM. FREQ
DSC FREQ
AREA CALL
: 34
°
00
N 135
°
00
E ↓ 10
°
→ 10
°
: TELEPHONE
: NO INFO
: 2M-INTL
NO INFO
FREQUENCY
CHANNEL
10.
Rotate the [ENTER] knob to choose appropriate item and then push the [ENTER]
knob. Enter channel or frequency. (See page 5-6 for how to enter channel and
frequency.)
11. Push the [ENTER] knob to open the DSC FREQ menu.
*
Message file entry
*
CALL TYPE
AREA
COM. TYPE
COM. FREQ
DSC FREQ
: AREA CALL
: 34
°00
N 123
°
E ↓12
°
→ 10
°
: TELEPHONE
: NO INFO
: 2M-INTL
16 MHZ
18 MHZ
22 MHZ
25 MHZ
OTHER
OTHER: Private channels.
6 MHZ
8 MHZ
12 MHZ
4 MHZ
2 MHZ
Rotate [ENTER] knob
to scroll.
12.
Rotate the [ENTER] knob to choose appropriate DSC band and then push the
[ENTER] knob. Choose appropriate DSC frequency and then push the [ENTER] knob.
13. Follow “How to Enter File Name and Number” on page 6-3 to enter file name and
number.