Filter
Top Products
12 MAINTENANCE & TROUBLESHOOTING
12-11
Tone test
1. Choose Self Test from the System Menu as shown in paragraph 12.8.4.
2. While pressing and holding down the [Shift] key, press the [↓] key to show the Tone
Test menu.
Tone Test
1: Tone Test 1 (All Char)
2: Tone Test 2 (Fox)
3: Tone Test 3 (Beta)
4: Tone Test 4 (Mark)
5: Tone Test 5 (Space)
6: Tone Test 6 (BY)
Tone test menu
3. Choose a test and press the [Enter] key. You may stop a tone test at anytime by
pressing the [Enter] key.
Tone test 1 (All characters)
This test checks for proper transmission of all figures, letters and codes. To conduct the
test, call a station in the ARQ or FEC mode. Execute the test, confirming that all
characters are transmitted correctly. "Now testing Tone Test 1" appears during the testing.
Since the test is conducted continuously, you may press the [Esc] key twice followed by
the [F10] key to stop the test and return to the tone test menu.
Station Name :
Frequency (T/R) : / (kHz) Comm Mode : Auto
Comm Status : Connect Send Lock Error Mark Space
1:File 2:Edit 3:Operate 4:Window 5:Station 6:System 7:WRU 8:HR 9:Over 10:Break
1996-11-15 13:26:45.45 Caps Eng
Now Testing Tone Test 1 (All Char).
ABCDEFGHIJKLMNOPQRSTUVWXYZ1234567890-?:().,'=/+abcdefghijklmnopqrstuv
wxyz
ABCDEFGHIJKLMNOPQRSTUVWXYZ1234567890-?:().,'=/+abcdefghijklmnopqrstuv
wxyz
ABCDEFGHIJKLMNOPQRSTUVWXYZ
System
Lock Change Default
Setup
Tone test