Filter
Top Products
6 PREPARING TX CALLS
6-8
10. Rotate the [ENTER] knob to choose appropriate DSC band and then push the
[ENTER] knob. Choose appropriate DSC frequency and then push the [ENTER] knob.
11. Follow “How to Enter File Name and Number” on page 6-3 to enter file name and
number.
6.5 Preparing Test Calls
1. At the DSC standby screen, press the [#/SETUP] key to open the Setup menu.
2. Rotate the [ENTER] knob to choose MESSAGE and then push the [ENTER] knob.
3. Push the [ENTER] knob to open the CALL TYPE menu.
*
Message file entry
CALL TYPE
STATION ID
COM. TYPE
COM. FREQ
DSC FREQ
: INDIVIDUAL
:
---------
: TELEPHONE
: NO INFO
: 2M-INTL
INDIVIDUAL
PSTN CALL
GROUP CALL
AREA CALL
TEST CALL
4. Rotate the [ENTER] knob to choose TEST CALL and then push the [ENTER] knob.
5. Push the [ENTER] knob to open the COAST ID entry window.
*
Message file entry
CALL TYPE
DSC FREQ : 2187.5 KHZ
: TEST
COAST ID
000000000
6. Enter coast ID where to send the test message and then push the [ENTER] knob.
7. Push the [ENTER] knob to open the DSC FREQ menu.
DSC FREQ KHZ
*
Message file entry
CALL TYPE
COAST ID
: Test
: 001234567
: Safety
: kHz
VIEW
4207.5
6312.0
8414.5
12577.0
16804.5
2187.5
8. Rotate the [ENTER] knob to choose appropriate DSC frequency and then push the
[ENTER] knob.
9. Follow “How to Enter File Name and Number” on page 6-3 to enter file name and
number.