Filter
Top Products
5 CALLING, RECEIVING
5-18
5.3.2 Receiving a group call
Group ID must be registered in order to receive a group call. See paragraph 6.2.
1. The audio alarm sounds and the display shows "Group call received" when a group call
is received.
FROM SHIP:
123456789
ROUTINE
TELEPHONE
TX: 2164.0 KHZ
RX: 2164.0 KHZ
Group
call received.
STOP ALARM
2. Press the [CANCEL] key to silence the alarm, and the display changes as below.
*
Received message
*
MAR-23-2002-23:59 ECC: OK
GROUP CALL
FROM SHIP :
123456789
ROUTINE
TELEPHONE
TX: 2164.0 KHZ
RX: 2164.0 KHZ
GO TO ALL VIEW
3. Press the [CANCEL] key to go to the radiotelephone screen. Watch on the working
frequency.
Receiving message by NBDP Terminal Unit
After receiving a group call, do the following:
1. The controls unit’s display shows “OCCUPIED” and the TX and RX frequencies.
2. The message from the sending station appears on your NBDP Terminal Unit.