Filter
Top Products
11 NBDP TRANSMITTING, RECEIVING
11-10
11.8 Communication Buffer
The communication buffer is a temporary memory which stores transmit and receive
messages. To display the contents of the communication buffer, do the following:
1. Escape from the message creation screen.
2. Press the [PgDn] or [PgUp] key. The contents of the communication buffer are
displayed.
To print them, press the [Ctrl] and [P] keys simultaneously. To erase the contents from the
screen, press the [PgDn] key while pressing the [Fn] key.
To erase the contents of the buffer, press the [F1] and [9] keys.
11.9 Preparing Macrofiles for Automatic Telex
11.9.1 Automatic telex overview
This section shows you how to communication with a coast station which handles
automatic telex transmission, using macrofiles. You will also need to register
communication channels and stations, and prepare macrofiles.
Coast stations using automatic telex are MCI Marine Services (North America), Sydney
Radio (Australia), Lyngby Radio (Denmark), and others. The procedure is mostly common
to all coast stations, however refer to the coast station’s traffic manual for details.
STORE-AND-
FORWARD
DIRECT
DIALING
MULTI-
ADDRESS
INTERNATIONAL
TELEX NETWORK
CENTRAL
SYSTEM
SYSTEM
CONTROL
SUB-STATION
SHIP
Sample automatic telex network
The service available in automatic telex are
• Message transfer between ship and coast station (store-and-forward)
• Connection with landline telex (direct dialing)
• Multi address.