Filter
Top Products
7 DSC/WATCH RECEIVER SETUP
7-2
7.2 Auto Ack Menu
The Auto Ack menu enables/disables automatic acknowledgement of individual, position
and polling calls. Press the [#SETUP] key, choose AUTO ACK at the DSC standby screen
and then push the [ENTER] knob to display the Auto Ack setup menu.
Comply type
Setting of
[5/ACQ /SQ] key
ABLE UNABLE
AUTO ACK Can send acknowledge
automatically
Can send UNABLE
automatically.
MANUAL ACK Can send acknowledge
manually
Can send UNABLE manually.
Default: ABLE
**
Auto ack setup
**
COMPLY TYPE : ABLE
UNABLE REASON :
NO REASON GIVEN
POSITION CALL : OFF
POLLING CALL : ON
UNABLE
ABLE
Choose ABLE or UNABLE as automatic
acknowledgement reply to Individual
calls.
Note: Automatic acknowledge is
automatically disabled when RX
call contains error, as required by
law. Further, automatic
acknowledge is disabled in case of
OFF HOOK.
Default: NO REASON
NO REASON
BUSY
EQUIP DISABLE
MODE NOT USABLE
CH NOT USABLE
Sets reason for UNABLE.
Note: This menu is the same as manual
acknowledgement. EQUIPMENT
DISABLE is shown in calls when
EQUIP DISABLE is selected.
Default: ON
Effective when [5/ACK/SQ] key
is set for "AUTO ACK."
OFF: Disables automatic
acknowledgement of
position request.
ON: Enables automatic
acknowledgement of
position request.
OFF
ON
Default: ON
Effective when [5/ACK/SQ] key
is set for "AUTO ACK."
OFF: Disables automatic
acknowledgement of
polling request.
ON: Enables automatic
acknowledgement of
polling request.
OFF
ON
Rotate [ENTER]
knob to choose